AZZA Toledo 301 - Manual (Page 9)

6_2.5” SSD & HD Device Installation
7_Top Fans Installation
8_Close The Side Panel
1.Take off the 2.5” device holder from 3.5” device.
2.Put the 2.5” device in this holder. Total you can put 2 2.5” device in this
holder, one on bottom, one on top.
3.Secured the 2.5” device with screws, then put this 2.5” device holder
back to 3.5” HD holder and secured it with screws.
4.Push the 3.5” HD holder back to HD cage.
1.Put the 2.5” device on the 3.5” HD holder.
2.Secured the 2.5” device with screw.
3.Push the 3.5” HD holder back to HD cage.
Option 1:
Take off the top panel and placed the fans
on top of the case and screw the fans from
the inside the case.
Option 1:
Option 2:
Option 2:
Place the fans beneath the top panel and
screw the fans from outside the case.
Closed the side panel along with those screws that we’ve remove from.
* This holder can put two 2.5’’ SDD devices.