AVer Bullet type IP cam(E) Installation Guide - Manual (Page 9)

7
ENGLISH
Mounting the IP Camera
○
1 Insert the 3 plastic anchors in the wall. Then, screws the 2 screws into the 2 top of plastic anchors
and do not fasten the screws; leave some space to allow IP camera to hook on the screws.
○
2 Hook the IP Camera on the screws that are screwed on top of 2 plastic anchors. Then, fasten the
screws.
○
3 Secure the last screw at bottom hole of IP camera.
○
4 Use the torx pin head bolt to lose the screw under the stand to adjust the angel of IP camera. After
adjusting, use the torx pin head bolt to fix the IP camera.