AVer SF1311H-R - Manual (Page 35)

32
PTZ Setting
[Note] If user needs to change these parameters, please check and set value properly for both, network
module and P/T scanner.
 Camera Protocol: This device can connect to a PTZ camera or speed dome camera and controls them
thru RS485 interface.
 Camera Address: This is the camera ID set in PTZ camera or speed dome camera.
[Note] Please DO NOT changes the default value if unnecessary. If so, user needs to check and set
value properly for both sides.
 Baud rate: This is the communication speed between network module and P/T scanner.