AVer E-I/O BOX - Manual (Page 2)

2
Front Panel
Name Description
(1) Power LED Lights when the power is connected
(2) Light indicator Sensor and relay indicators. Light when the sensor and relay is enabled.
(3) SW To adjust unit switch appropriate for using condition.
i
- In the figure, black pane represents as the switch position.
- After SW setting, please plug power connector again or
press Reset key to initialize External I/O Box.
(3) SW
Using the DIP switch no.1 & 2 to set the baud-rate setting.
Using the DIP switch no. 3 & 4 to set the type of connection interface.
Using the DIP switch no. 5 ~ 7 to set the ID definition.
(4) RJ-45 port Ethernet connection