AVer USB Dongle - Manual (Page 2)

2
For Added Installation:
To add more channels for existing DVR system or add more DVRs for existing CMS system, please
follow the below steps to install.
1. Run the DVR/CMS application.
2. Plug in USB Dongle to your DVR/CMS server.
3. The DVR/CMS system will detect it automatically and the driver installation dialog will pop up.
Click OK to install the driver.
4. If user chooses to install driver later, then un-plug the USB dongle and plug in again later for
installing.
5. After installation completed, the DVR/CMS system will restart automatically.
6. DO NOT un-plug the USB Dongle while the DVR/CMS application is operating, it may cause the
application crash abnormally.
© 2011 AVer Information Inc. All rights reserved.