Setup, System setting, Detail – AVer System Contrll Pro installation guide User Manual
Page 4: System controller selection, Enable, Model, System controller pro (usb connection)
AVerMedia Information Inc. Product Operation SOP– System controller Pro firmware update on
CMS3000
4
Document Name
Preparation
Approval
Issue Date
Revision
(SOP) System controller Pro update
firmware through CMS3000
FAE
Wendy
May. 19
th
, 2010
1.0
6.
Please insert the USB cable of System controller Pro to CMS 3000 computer device.
Step #2: On DVR Server Side.
Follow the below steps to select the model:
1.
Start up the DVR program.
2.
Click
Setup
.
3.
Select System, the
System Setting
windows will appear.
4.
Click
Detail
that is next to the
System Controller selection.
5.
Mark
Enable
check box to enable the function of the system controller.
6.
Select the
Model
as
System Controller Pro (USB connection)
.
7.
When DVR server has detected the System Controller device, user should see the model name System
Controller Pro in drop-down list.
i
The upgrade process doesn’t support when System Controller connect to DVR server
through the RS485 port.
1. Click Upgrade button.
2. Click Select File button to locate the firmware.