Compaq EP7150 - Manual (Page 10)

10
English
Installation
Powering On the Projector
1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will fl ash green.
3. Turn on the lamp by pressing “Power” button on the control
panel. And the Power LED will turn green.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically
within “Management” menu; check that “Source Lock” has
been set to “Off”.
 If you connect multiple sources at the same time, use the
“Source” button on the control panel or on remote control to
switch.
Powering On/Off the Projector
 Turn on the projec-
tor fi rst and then
the signal sources.
Power
Lens Cap
1
2