General instructions, Installation over ceramic tiles, Notice – Alumax K-KN4Z User Manual
Page 3: Care for your frameless shower door, Tools and materials required, 2 people required

General Instructions
●
- Read this manual carefully and completely before
proceeding.
- It is recommended that you wear safety glasses at all
times during the installation.
Installation over Ceramic Tiles
●
- Silicone should be used to seal the gap where the
ceramic tiles meet the fixed panel.
- If your shower door is to be installed over ceramic tiles,
the tiles should lay completely under the wall jamb.
Notice
●
- Caulking: no sealant is required inside the shower.
- All models are equipped with transparent sealing
gaskets.
Care for your Frameless Shower Door
●
- Never use scouring powder pads or sharp instruments on
metal pieces or glass panels.
An occasional wiping down with a mild soap diluted
in water is all that is needed to keep the panels and
aluminum parts looking new.
- We recommend wiping the glass panels with a squeegee
after each use.
Product specifications are subject to change
without notice.
1
TOOLS AND MATERIALS REQUIRED
DRILL
SILICONE
SCREWDRIVERS
1/4˝
& 1/8˝ DRILL BITS
*
PENCIL
MALLET
CUTTING PLIER
LEVEL
TAPE MEASURE
2 PEOPLE REQUIRED