Alumax 700c User Manual

Page 7

Page 7 of 7

EPH-N00-06077

6-3-02

Neatly caulk the inside perimeter of the shower

curb and the hinge and strike jambs.

NOTE: Improper caulking will result in leaks.

NOTE: The caulking should be allowed to cure for
twenty-four hours before using your new shower
enclosure.

The Care and Cleaning of your new A

LUMAX

Bath Enclosure. The simplest and preferred

method of cleaning your unit is by washing it with clean water and drying with a soft cloth.
If soil is still present after drying, a non-abrasive cleanser with a pH of seven to eight may be
used. Comet Bathroom Cleaner

has been tested and is recommended by the Bath Enclosure

Manufacturers Association (BEMA). Do not use scouring pads, sharp instruments, or acid-
based cleansers to clean the unit.

Thank you for choosing an A

LUMAX

Bath Enclosure. Please take a moment to complete

and return the enclosed Customer Response Card. The information you provide helps us
improve the quality of our products and provide better service to you, our customer.