Acolyte DMX Advance - Manual (Page 6)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
PA G E 5
O P E R AT I N G I N S T R U C T I O N S - Q U I C K S TA RT
4
5
Enter the DMX address by holding the Setup button for 3 seconds. Use the Mode+ and Mode- buttons
to set the first digit, use the Speed+ and Speed- buttons to set the second digit, and use the BRT+ and
BRT- buttons to set the third digit.
Press the setup button to accept this DMX address. Use this address when setting up your controller to
control the LEDs connected to this interface.