Acolyte Waterproof RibbonLyte without Channel - Manual (Page 6)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
B - M O U N T W AT E R P R O O F R I B B O N LY T E W I T H Z I P T I E PA D S
1
Clean the mountain surface free of dust and
debris using a wet cloth. For metal mounting
surfaces use rubbing alcohol (A) to wipe
clean.
PA G E 5
(A)
2 Take the backing off the zip tie pads (B).
(B)
3
Apply the zip tie pads (B) directly along the
mounting surface, approximately every 12
inches.
4
Drill a pilot hole through the center of each
zip tie pad (B) into the mounting surface
where they are positioned.