Acolyte Waterproof RibbonLyte without Channel - Manual (Page 4)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L A - - S T E P S 5 - 6
5
6
Drill pilot holes at the center of each mark
you made.
Tighten the screws (C) through the silicone
pads (B) until all of the pads are secure and
the RibbonLyte (D) is held tightly in place.
(D)
(B)
(C)
PA G E 3