Acolyte RibbonLyte in Channel with Slide-In Stand - Manual (Page 5)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L AT I O N - - S T E P S 9 - 1 0
9
10 Slide or snap the lens (G) into place.
PA G E 4
Apply the RibbonLyte (F) by placing one end
of the strip at the end of the double-sided tape
(E) inside the channel (C) then slide your finger
along the RibbonLyte (F) to make sure there is
firm contact and that the tape adheres well.
(G) (G)
(C)
(F)