Acolyte RibbonLyte for In-Wall Channel - Manual (Page 3)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L AT I O N - - S T E P S 1 - 4
1
3
2
4
PA G E 2
Clean the channel mounting surface (A) with
a cloth and Rubbing Alcohol (C) to remove
dust and debris from the channel.
(D)
(C)
Remove backing from double-sided tape
(D).
(D)
Remove the backing from the RibbonLyte
(E) that you are going to be applying atop
the double-sided tape.
(E)
(A)
After surface is dry, apply 1/16” double-sided
tape (D) to the inside of the channel (A),
where the RibbonLyte (E) will be applied.