Crate Amplifiers BX50 DLX - Manual (Page 8)

BX25DLX/BX50DLX TECHNICAL SPECIFICATIONS:
BX25DLX BX50DLX
Output Power Rating 27W RMS 1%THD 4
Ω
, 120 VAC 50W RMS 1.5%THD 4
Ω
120 VAC
Gain Channel A 115dB 115dB
Channel B 76dB 76dB
CD Inputs 36dB 36dB
Tone Range Low 20dB @ 50Hz 20dB @ 50Hz
Low Mid 24dB @ 150Hz 24dB @ 150Hz
High Mid 20dB @ 1kHz 20dB @ 1kHz
High 34dB @ 10kHz 34dB @ 10kHz
Signal to Noise Ratio 75dB 75dB
Input Impedance 220k ohms 220k ohm
Maximum Signal Accepted 7 volts, peak-to-peak 7 volts, peak-to-peak
Power Requirements 110VAC, 60Hz, 45VA 110VAC, 60Hz, 85VA
100/110VAC, 50/60Hz, 45VA 100/110VAC, 50/60Hz, 85VA
230VAC, 50/60Hz, 45VA 230VAC, 50/60Hz, 85VA
Internal Speaker Size 10” 12”
Type Crate Custom Crate Custom
Magnet 30 oz 30 oz
Voice Coil 1.0” 1.5”
RMS Rating 30 watts 50 watts
Impedance 4 ohms 8 ohms
Size 17” H x 17” W x 12” D 20.62” H x 17” W x 13.5” D
Weight 39 lbs 47 lbs
www.crateamps.com
©2002 SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON, ST. LOUIS, MO. 63133
P/N 47-093-01 • 120202
BASS AMPLIFIER
The BX25DLX/BX50DLX is covered with a durable black Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this Crate manual are subject to change without notice.