Handle removal (cont.) handle reinstallation, Refrigerator door and freezer drawer removal, Refrigerator door removal – LG LMX28988 User Manual

Page 10: Electric shock hazard, Installation, Awarning, Handle removal

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLATION

HANDLE REMOVAL

(CON

HANDLE REINSTALLATION

Place the handle on the door by aligning handle

footprints to fit mounting fasteners and tighten the
set screws with a 2.5 mm (3/32") Allen wrench.

NOTE: If the handle mounting fasteners need to
be tightened or removed use a 1/4" Allen wrench

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

REFRIGERATOR DOOR REMOVAL

AWARNING

Electric Shock Hazard

• Disconnect electrical supply to the refrigerator

before installing. Failure to do so could result in

death or serious injury.

• Do not put hands or feet or metal sticks into the air

vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.

• Be careful when you work with the hinge, base

grille, and stopper. You may be injured.

Before you begin, remove food and bins from the

doors.

If your entrance door is too narrow for the refrigerator

to pass through, remove the refrigerator door and

move the refrigerator sideways through the doorway.

NOTE : When you pull out the tube, first you
have to push the collet by opposite direction

of arrow in the upper picture and pull the tube
out by direction of arrow.