Remote control operations, O power, Q fan speed – LG WG5005R User Manual
Page 17: On/off timer, O cool/energy saver/fan/dry, Temperature setting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating Instructions
Remote Control Operations
The controls look like this:
Controls
— ®
0
®
O Power
To turn the Set ON, push the button. To turn the Set OFF, push the button again.
This button takes priority over any other buttons.
When you first turn it on, the Set is on the High cool mode and the temp, at 72°F
Q Fan Speed
Pressing the Fan Speed button toggles between
Low
and
High
speeds.
& On/Off Timer
- stopping Operation
Each press of the button cycles through the options in this order:
1 Hour -*2 Hours-*3 Hours->4 Hours->5 Hours->6 Hours->7 Hours
->8 Hours-*9 Hours-*10 Hours-*11 Hours-*12 Hours-*CANCLE.
The set temperature will be raised 2°F after 30 minutes and again
by 2°F after another 30 minutes.
- Starting Operation
Each press of the button cycles through the options in this order:
1 Hour -* 2 Hours-*3 Hours-*4 Hours-*5 Hours-*6 Hours-*7 Hours
-*8 Hours-*9 Hours-*10 Hours-*11 Hours-12 Hours-*CANCLE.
O Cool/Energy Saver/Fan/Dry
Everytime you push this button, it will toggle between COOL,
ENERGY SAVER, FAN and DRY.
@ Temperature Setting
This button can automatically control the temperature of the room.
The temperature can be set within a rance of 60°F to 86°F by 1°F.
Select the lower number for lower temperature of the moon.
Owner’s Manual 17