Image sensor cleaning – Nikon D7000 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II
"Clean atStartup/Shutdown"
Choose from the following options:
Option
Description
|§0N Clean at startup
The image sensor is automatically cleaned each time the camera is turned
on.
Clean at
liiOfF . .
shutdown
The image sensor is automatically cleaned during shutdown each time
the camera is turned off.
Cleanatstartup
& shutdown
The image sensor is cleaned automatically at startup and at shutdown.
ii! Cleaning off
Automatic image sensor cleaning off.
1
Select Clean at startup/shutdown.
Display the
Clean image sensor
menu as
described in Step 2 on the previous page.
Highlight
Clean at startup/shutdown
and
press ►.
2
Select an option.
Highlight an option and press
Image Sensor Cleaning
Using camera controls interrupts image sensor cleaning, image sensor cleaning may not be
performed at startup if the flash is charging.
Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using
the options in the
Clean image sensor
menu, clean the image sensor manually (ca 286) or
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be
performed again after a short wait.
285