Craftsman 320.48291 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING
The Laser line
projection Is weak
Batteries are weak Replace with new batteries
The Laser tine is
hard to see
The tool is too far
from the target
Move the tool closer to the target
The Laser line is
not projected
Power button is not
"ON"
Polarity of the
batteries is Incorrect
Check to make sure the power button
is in the “ON" position
Reinstall the batteries according to
the polarity indicator in the battery
compartment
The Laser line
projected is not
level
The level bubbles
of the vials are not
centered
Attach the laser level to the precision
leveling base and turn adjustment
knobs until the bubbles are centered
in the middle of the two reference
lines
Magstio adhesive
Is not adhering to
surface
Magstic is dirty
Magstic adhesive
has expired
Clean Magstic thoroughly with a damp
cloth and let dry
Replace Magstic material
Magstic adhesive
is not adhering to
the tool
"Wall Side" of the
adhesive is used
on the tool
Make sure the "Tool Side" of the
adhesive Is used on the base of the
tool
Magstic adhesive
has expired
Replace Magstic material
MAGSTIC REPLACEMENT
The Laser Level Model Number is found on the cover of this manual. Always
mention the Model Number when ordering replacement Magstic adhesive strips.
Parts No,
Part Description
Quantity
3703724001
Magstic
6 Pieces
^8291 ManuaLRwIsed 06^3907
PagB IS