Craftsman 320.48291 - Manual (Page 10)

OPERATION
Using The Level With A Tripod (Not Included}
Because the Pa!m Grip Laser Level ts a “for­
ward" projection device, it can be placed on any
reasonably level flat surface to draw a plumb
vertical line. When used in conjunction with any
standard tripod (1/4-20 UNC threaded fitting)
versatility is further enhanced (See Fig. 11).
Mounting The Level To A Tripod (See Fig. 12)
1. Attach the All-Position Leveling Base to
the tripod using the standard 1/4-20 UNC
threaded fitting included with the tripod.
(See Fig. 11).
2. Place the level on the All-Position Leveling
Base.
3. Push the “ON/OFF" button once to turn
the level. DO NOT point tool in the direction
of your eyes or anyone else's eyes in the
vicinity of use.
4. Determine a line with two points A, B (Fig. 12). Align your laser fan beam to
these points.
Fig. 11
48291 ManuaLRevIsed.OBOSOT Page 10