beautypg.com

Craftsman 358.799431 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

tion to become ineffective and result in

serious injury.

UNIT/MAINTENANCE SAFETY
• Turn off aii controls and allow the mo­

tor to stop before discxjnnecting the

unit from the power source.

• Disconnect the unit from the power

source when not in use. Do not leave

the unit when it is plugged into outlet.

• Do not set the unit on any surface ex­

cept a clean, hard area while the unit
is running. Debris such as gravel,
sand, dust, grass, etc., could be
picked up by the air intake and thrown
out through the discharge opening,
damaging the unit, property, or caus­
ing serious injury to bystanders or op­
erator.

• Do not overreach or use from unstable

surfaces such as ladders, trees, steep
slopes, rooftops, etc. Use extra care

when cleaning on stairways. Keep
firm footing and balance at all times.

Keep hands out of tubes.

• Inspect the entire unit before each use

for worn, loose, missing, or damaged

parts. Do not use until the unit is in
proper vi/orking order.

• Disconnect unit from power source be­

fore servicing, cleaning, performing

maintenance, or storing.

• This unit is double insulated. See the

DOUBLE INSULATION section. Have all
internal service performed by qualified
service repair person nei to avoid
creating a hazard or voiding your war­
ranty.

• Have all maintenance other than the

recommended procedures described
in the instruction manual performed by

your Sears Service Center.

• Always see your Sears Service Cen­

ter to replace a damaged impeller.

Parts that are chipped, cracked, bro­
ken, or damaged in any other way
can fly apart and cause serious inju­
ry. Replace damaged parts before
using the unit.

• Never place any object in the air in­

take opening as this could restrict

proper air flow and cause damage to

the unit.

• Never douse the unit with water or

other iiquids or squirt with a water
hose. Clean with a damp sponge and
mild soap. See STORAGE.

• Check air intake openings and tubes

frequently, always with the unit

stopped and power source discon­
nected. Keep vents and tubes free of
debris which can accumulate and re­
strict proper air flow.

• Do not burn, incinerate, or expose this

unit to extreme heat.

• Store the unit unplugged in a high,

cool, dry, indoor area out of the reach
of chiidren.

• Use only recommended attachments

and replacement parts to avoid creat­
ing a hazard and/or voiding warranty.

• Maintain the unit according to recom­

mended procedures.

• Use only for jobs explained in the OP­

ERATION section of this manuai.

BLOWER SAFETY

• Use oniy in dayiight or in good artificial

light.

• Inspect the area before using the

unit. Remove ail debris and hard ob­

jects such as rocks, glass, wire, etc.,
that can ricochet, be thrown, or oth­

erwise cause injury or damage dur­
ing operation.

• Avoid accidental starting. Be sure the

switch is in the OFF position and keep

your hand and fingers away from the

switch while connecting the unit to the
power source or when carrying a unit
connected to the power source.

• Never run the unit without the proper

equipment attached. When used as a
blower, always install a blower tube.
Use only recommended attachments.
Do not use with any opening blocked.
Keep free of dust, lint, hair and any­

thing that may reduce air flow.

• To avoid spreading fire, do not use

blower near leaf or brush fires, fire­
places, barbecue pits, ashtrays, etc.

• Never place objects inside the blower

tubes; always direct the blowing debris

away from people, animals, glass, and
solid objects such as trees, automo­
biles, walls, etc. The force of air can
cause rocks, dirt, or sticks to be

thrown or to ricochet which can hurt

people or animals, break glass, or
cause other damage.

• Never use for spreading chemicals,

fertilizers, or any other substances
which may contain toxic materials.

VACUUM SAFETY

• Stop the motor and disconnect the

power source before opening the air
inlet door or attempting to insert or re­
move the vacuum tubes. The motor
must be stopped and the impeller
blades no longer turning to avoid seri­
ous injury from the rotating blades.

• Hard objects can be thrown through

the collection bag or the housing and

become dangerous missiles which
can cause serious injury to the opera­

tor or others.

4