Maintenance – Craftsman 315.113913 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE
BULB REPLACEMENT
BUTTON
BULB
Replace the bulb with the same type rated
19.2 V, 0.6 Amp.
Always ask for replacement bulb number 7811502.
TABS
PULL COOLED BULB FROM SPRING; PUSH NEW BULB INTO
SPRING. TO REPLACE LENS COVER, ALIGN TABS INSIDE LENS
COVER WITH SLOTS ON HOUSING; SNAP INTO PLACE.
Fig. 4
BATTERIES
This product will accept DIeHard® 19.2 V llthlum-lon bat
tery packs and Craftsman 19.2 V nickel-cadmium battery
packs.
The batteries for this product have been designed
to provide maximum trouble-free life. However, like
all batteries, they will eventually wear out. Do not
disassemble battery pack and attempt to replace the
batteries. Handling of these batteries, especially when
wearing rings and jewelry, could result In a serious burn.
To obtain the longest possible battery life, we suggest the
following:
For lithium-ion batteries:
■ Remove the battery pack from the charger once It Is
fully charged and ready for use.
For battery pack storage longer than 30 days:
■ Store the battery pack where the temperature Is below
80°F and away from moisture.
■ Store battery packs In a 30%-50% charged condition.
■ Every six months of storage, charge the pack as
normal.
For nickel-cadmium batteries:
■ Remove the battery pack from the charger once It Is
fully charged and ready for use.
For battery pack storage longer than 30 days:
■ Store the battery pack where the temperature Is below
80°F.
■ Store battery packs In a “discharged” condition.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product uses nickel-cadmium
and llthlum-lon batteries. Local, state
or federal laws may prohibit disposal
of batteries In ordinary trash.
Consult your local waste authority
for Information regarding available
recycling and/or disposal options.
WARNING:
Upon removal, ooverthe
battery paok’s terminals with heavy-duty
adhesive tape. Do not attempt to destroy
or disassemble battery paok or remove any
of its oomponents. Lithium-ion and niokel-
oadmium batteries must be reoyoled or
disposed of properly. Also, never touoh both
terminals with metal objeots and/or body
parts as short oirouit may result. Keep away
from ohildren. Failure to oomply with these
warnings oould result in fire and/or serious
injury.