Craftsman 315.113913 - Manual (Page 5)

SYMBOLS
Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the worklight better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
min Minutes Time
-Ay Alternating Current Type of current
— Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
m
Class II Construction Double-insulated construction
,,,/min Per Minute Revolutions, strokes, surface speed, orbits etc,, per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
A
Safety Alert Precautions that involve your safety.
Hot Surfaces
To reduce the risk of injury or damage, avoid contact with any hot
surface.
The following signal words and meanings are intended to explain the levels of risk associated with this product,
SYMBOL SIGNAL MEANING
A
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
A
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
A
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.
CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
A WARNING: To avoid serious personal injury, do not attempt to use this produot until you read
thoroughly and understand oompletely the Operator’s Manual. If you do not understand the
warnings and instruotions in the Operator’s Manual, do not use this produot. Call Customer
Servioe for assistanoe.
SAVE THESE INSTRUCTIONS