Craftsman 917.28726 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5. ATTACH REAR LIFT LINKS (C) - Lift

rear corner of mower and position

slot in link assembly over pin on rear

mower bracket (D) and secure with

washer and retainer spring.

6. Repeat on opposite side of tractor.

into bracket, slide collar (L) onto guide
and secure with retainer spring (K).

10. Hook end of clutch cable spring (Q)

into hole in idler arm (R).

11. Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper rout
ing in all mower pulley grooves.

7. ATTACH FRONT LINK (E) - Work from

left side of tractor. Insert rod end of link
assembly through front hole in tractor

front suspension bracket (F).

8. Insert end of link (E) into hole in front

mower bracket (H) and secure with