Tools neede, Tools needed – Craftsman 315.284610 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FEATURES

BLADES

For maximum performance, it is recommended that you
use the 24-tooth, 10 in. carbide-tipped combination biade
provided with your saw. Additionai biade styies of the
same high quality are available for specific operations
such as ripping. Your local dealer can provide you with

complete information.

Kerf width must be within the limits stamped on the
spreader/riving knife.

A WARNING:

Do not use blades rated less than the

speed of this tool. Failure to heed this warning could
result in personal injury.

TOOLS NEEDE

The following tools (not included or drawn to scale) are needed for assembly and making adjustments:

'H'n'n’n'TTTpxTjTTTyrTTjTTTjTjTpTTpTTpTTyTjTyTTTjTTTjTi;

1 1 I I I 1 1

FRAMING SQUARE

PHILLIPS

SCREWDRIVER

COMBINATION

SQUARE

C-CLAMP

FLATHEAD

SCREWDRIVER

Fig. 4