Craftsman 136.748270 - Manual (Page 5)

1 R e m o v e the vacuum bag and the
vacuum tube assembly from the blower
housing.
Converting from Vacuum to Blower 2 Install the blower tube and then the
inlet cover onto the blower housing.
Important; The blower will not run
unless the bottom inlet cover is locked
In place.
Important: This blower is intended for
outdoor, residential use only Do not use
it indoors or for commercial or industrial
purposes.
Connecting to a Power Source
To reduce the risk of electric shock, this
appliance has a polarized plug (i.e., one
blade is wider than the other). Use only
a polarized, UL listed extension cord
recommended for outdoor use. A polarized
plug will fit in a polarized cord only one
way. If the plug does not fit fully in the
cord, reverse the cord If it still does not fit,
purchase a polarized extension cord. If you
have a polarized extension cord and the
extension cord plug does not fit fully into the
wall receptacle, reverse the plug. If it still
does not fit. contact a qualified electrician
to install the proper outlet. Do not change
the appliance or extension cord plug in any
way.
Use only an extension cord recommended
for outdoor use,
A WARNING: If you do not fully seat
the extension cord on the inlet plug, or
if the plug and cord do not fit firmly, the
loose plug could lead to overheating
and cause a fire, possibly burning you
or others.
' Ensure that you fully seat the cord on
the plug
• Check the connection regularly to
ensure that the cord is firmly attached,
• Do not use a worn-out or loose
extension cord.