beautypg.com

Know your compound miter saw, 15 amp motor, 10 in. blade – Craftsman 315.212110 User Manual

Page 10: Cutting capacities, Features know your compound miter saw

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

FEATURES

KNOW YOUR COMPOUND MITER

SAW

See Figure 3.

Before attempting to use your saw, familiarize yourself
with all operating features and safety requirements.

WARNING:

Do not allow familiarity with your

saw to make you careless. Remember that a

careless fraction of a second is sufficient to inflict

severe injury.

15 AMP MOTOR

Your saw has a powerful 15 amp motor with sufficient

power to handle tough cutting jobs. It is made with all
ball bearings, and has externally accessible brushes
for ease of servicing.

10 in. BLADE

A 10 in. saw blade is included with your compound

miter saw. It will cut materials up to 2-5/8 in. thick or

5-3/4 in. wide, depending upon the thickness of the
materia! and the angle at which the cut is being made.

CUTTING CAPACITIES

When the miter angle (miter table) is set at 0° and
the bevel angle is set at 0°:

Your saw will cut materials up to a maximum of
5-9/16 in. wide X 2-9/32 in. thick.

It will cut materials up to a maximum thickess of
3-9/16 in. thick X 4 in. wide.

When the miter angle (miter table) is set at 45® and
the bevel angle is set at 0°:

Your saw will cut materials up to a maximum of
3-15/16 in. wide X 2-9/32 in. thick.

When the miter angle (miter table) is set at 0° and
the bevel angle is set at 45°:

Your saw will cut materials up to a maximum of
5-9/16 in. wide X 1-9/16 in. thick.

When the miter angle (miter table) is set at 45° and
the bevel angle is set at 45°:

Your saw will cut materials up to a maximum of
4 in. wide X 1-9/16 in. thick.

Fig. 3