Craftsman 315.115210 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WARNING: When servicing, use oniy identical
Craftsman
replacement parts.
Use of any other part
may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
A WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products,
penetrating
oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy
plastic.
Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.
Only the parts shown on parts list, page 18 and 19, are
intended to be repaired or replaced by the customer. All
other parts should be repfaced at a Sears Service Center.
WARNING: Do not
attempt
to modify this tool
or
create
accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
BATTERIES
Your drill's battery pack is equipped with nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery life.
Never store batteries in a discharged condition.
Recharge them immediately after they are discharged.
A!! batteries gradually lose their charge. The higher the
temperature the quicker they lose their charge, if you
store your tool for long periods of time without using
it, recharge the batteries every month or two. This
practice will prolong battery life.
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
..... . batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BATTERY PACK REMOVAL AND PREPARATION
FOR
recycling
WARNING: Upon
removal, cover the battery pack's
terminals with
heavy duty
adhesive
tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
The following recommended accessories are currently available at Sears Retail Stores.
■ 0-Pc. Extra Length Magnite Power Bit Set
■ 17-Pc. Power Screwdriver/Nutdriver Set and Case
30-Pc. Power Screwdriver/Nutdriver Set and Case
High Speed Bits (For Wood or Metal)..3/4 in. Max.
WARNING:
The use of attachments or accessories not listed might be hazardous.
16