Craftsman 486.246232 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP
1: (SEE FIGURE 2)
Open parts bag labelled "A" and verify that all parts are
present.
NOTE: Place cardboard ora mat on work surface to prevent
scratching of parts removed from carton and tractor.
A
CAUTION! Muffler is hot! Allow engine to
cool down before proceeding with bumper
installation.
NOTE: Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
SHOWN FULL SIZE
PARTS BAG "A"
REF
PART NO.
QTY.
DESCRIPTION
A
43350
2
Carriage Bolt, 3/8-16x1"
В
43062
2
Hex Bolt, 3/8-16
X
1-1/2"
C
44072
4
Whiziock Nut, 3/8"
D
44742
4
Plug
E
48866
2
Pivot Spacer
F
1643-60
2
Plastic Grip
STEP 2:
(SEE FIGURES)
•
Remove hood from tractor using instructions in your
tractor owner's manual. Place hood on cardboard or
on a mat to protect paint.
•
Remove the browning shield from the front of the
tractor as shown.
IMPORTANT: Be sure to reattach the browning shield
after bumper is installed.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE