Craftsman 900.370520 - Manual (Page 7)

TO INSTALL SIDE
DISCHARGE CHUTE
• Shut the mower off, wait until the blade
stops, and unplug power cord.
• Reach down between the mower han­
dles, raise the rear door and hold it up
with one hand. Ensure that the mulch
insert has been removed. See page 12,
'To Remove Mulch Insert",
• Grasp the discharge chute with the other
hand and while tilting It downwards Insert
its hook into the mower’s discharge
opening. (See Fig. A)
• Rotate the chute until it is in flat contact
with the deck, and the bottom ribs fit into
the deck grooves. (See Fig. B)
• Lower the rear door until it rests on top
of the discharge chute.
WARNING:
• Do not use the discharge chute if it is
damaged.
• For your own safety, DO NOT use the
mower without either the grasscatcher,
mulch insert, or the discharge chute in
operating position.