Craftsman 358.745511 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If situations occur which are not cov
ered in this manual, use care and
good judgment. If you need assis
tance, contact your Sears Service
Center or call 1-800-235-5878-
OPERATOR SAFETY
• Dress properly. Always wear safety
glasses or similar eye protection
when operating, or performing main
tenance, on your unit (safety
glasses are available). Eye protec
tion should be marked Z87.
• Always wear face or dust mask if op
eration is dusty.
• Always wear heavy, long pants, long
sleeves, boots, and gloves. Wear
ing safety leg guards is recom
mended.
• Always wear foot protection. Do not
go barefoot or wear sandals. Stay
clear of spinning line.
• Secure hair above shoulder length.
Secure or remove loose clothing or
clothing with loosely hanging ties,
straps, tassels, etc. They can be
caught in moving parts.
• Being fully covered also helps pro
tect you from debris and pieces of
toxic plants thrown by spinning line.
• Stay Alert. Do not operate this unit
when you are tired, ill, upset or un
der the influence of alcohol, drugs,
or medication. Watch what you are
doing; use common sense.
• Wear hearing protection.
• Never start or run inside a closed
room or building. Breathing exhaust
fumes can kill.
• Keep handles free of oil and fuel.
UNIT / MAINTENANCE SAFETY
• Disconnect the spark plug before
performing maintenance except car
buretor adjustments.
• Look for and replace damaged or
loose parts before each use. Look
for and repair fuel leaks before use.
Keep in good working condition.
• Replace trimmer head parts that are
chipped, cracked, broken, or dam
aged in any other way before using
the unit.
• Maintain unit according to recom
mended procedures. Keep cutting
line at proper length.
• Use only 0.080" (2 mm) diameter
Craftsman® brand line. Never use
wire, rope, string, etc.
• Install required shield properly before
using the unit. Use only specified
trimmer head; make sure it is properly
installed and securely fastened.
• Make sure unit is assembled cor
rectly as shown in this manual.
• Make carburetor adjustments with
lower end supported to prevent line
from contacting any object.
• Keep others away when making car
buretor adjustments.
• Use only recommended Craftsman
accessories and replacement parts.
• Have all maintenance and service
not explained in this manual per
formed by a Sears Service Center.
FUEL SAFETY
• Mix and pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container approved for fuel.
• Do not smoke or allow smoking near
fuel or the unit.
• Avoid spilling fuel or oil. Wipe up all
fuel spills.
• Move at least 10 feet (3 meters)
away from fueling site before start
ing engine.
• Stop engine and allow to cool before
removing fuel cap.
• Always store gasoline in a container
approved for flammable liquids.
CUTTING SAFETY
WARNING:
Inspect the area be
fore each use. Remove objects
(rocks, broken glass, nails, wire, etc.)
which can be thrown by or become
entangled in line. Hard objects can
damage the trimmer head and be
thrown causing serious injury.
• Use only for trimming, scalping, mow
ing and sweeping. Do not use for edg
ing, pruning or hedge trimming.
• Keep firm footing and balance. Do
not overreach.
• Keep ail parts of your body away
from muffler and spinning line. Keep
engine below waist level. A hot muf
fler can cause serious burns.
• Cut from your right to your left. Cut
ting on left side of the shield will
throw debris away from the operator.
• Use only in daylight or good artificial
light.
• Use only for jobs explained in this
manual.
TRANSPORTING AND STORAGE
• Allow engine to cool; secure unit be
fore storing or transporting in ve
hicle.
• Empty the fuel tank before storing or
transporting the unit. Use up fuel left
In the carburetor by starting the en
gine and letting it run until it stops.