Craftsman 247.797852 - Manual (Page 15)

® Test the engine by using the chipper-shredder. If
engine tends to stall or die out, it usually indicates
that the mixture is slightly lean and it may be nec­
essary to open
{^) the needle valve slightly to
provide a richer mixture. This richer mixture may
cause a slight unevenness in idling
Throttle
ENGINE SPEED
Your engine speed has been factory set. Do not
attempt to increase engine speed or it may resuit in
personal injury. If you believe the engine is running
too fast or too slow, take your chipper-shredder to the
nearest SEARS Service Center for repair and adjust­
ment,
SERVICE RECOMMENDATIONS
SERVICE RECORD SCHEDULE SERVICE DATES
Fill in dates as you
complete regular service
First Before Every Every Begin- Before
5 Each 25 50 ning Each Storage
Hours Use Hours Hours Season
Check Fuel V
Drain Fuel V
Check Engine Oil Level V
Change Engine Oil V V
Oil Pivot Points
Service Air Cleaner V
Clean Engine Cylinder Fins a / V
Replace or Clean Spark Plug V
Spark Arrester Muffler
The Service Recommendations Chart is supplied to
assist the operator in proper maintenance of the chip­
per-shredder. This is only a check list; instructions will
be found in the Maintenance and Service Adjustment
sections of this manual
15