Product specifications, Customer responsibilities, Maintenance agreement – Craftsman 247.795940 User Manual
Page 3: Warranty
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONGRATULATIONS
on your purchase of a Sears
Craftsman Chipper-Shredder. It has been designed, engi
neered and manufactured to give you the best possible
dependability and performance.
Should you experience any problem you cannot easily rem
edy, please contact your nearest Sears Service Center/
Department in the United States. We have competent, well-
trained technicians and the proper tools to service or repair
this unit.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your chipper-shredder
properly. Always observe the “SAFETY RULES.”
PRODUCT SPECIFICATIONS
MODEL
NUMBER 247.795940
SERIAL
NUMBER_
DATE OF
PURCHASE.
THE MODEL AND SERIAL NUMBERS WILL BE FOUND
ON A LABEL ATTACHED TO THE FRAME OF THE
CHIPPER-SHREDDER.
YOU SHOULD RECORD BOTH SERIAL NUMBER AND
DATE OF PURCHASE AND KEEP IN A SAFE PLACE
FOR FUTURE REFERENCE.
CUSTOMER RESPONSIBILITIES
Read and observe the safety rules.
Follow a regular schedule in maintaining, caring for
and using your chipper-shredder.
Follow the instructions under “Customer Respon
sibilities” and “Storage” sections of this Owner’s
Manual.
Horsepower:
5.0
Displacement:
12.00 cu. in.
Fuel Capacity:
1-7/8 Quarts
(Unleaded)
Spark Plug (Gap .030 in.):
Champion
J-8C (or
Equivalent)
Ignition Air Gap:
.0125 in.
MAINTENANCE AGREEMENT
A Sears Maintenance Agreement is available on this
product. Contact your nearest Sears store for details.
WARNING: This unit is equipped with an internal combus
tion engine and should not be used on or near any unim
proved forest-covered, brush-covered or grass-covered land
unless the engine’s exhaust system is equipped with a
spark arrester meeting applicable local or state laws (if any).
If a spark arrester is used, it should be maintained in effec
tive working order by the operator.
In the State of California the above is required by law
(Section 4442 of the California Public Resources Code).
Other states may have similar laws. Federal laws apply on
federal lands. A spark arrester for the muffler is available
through your nearest Sears Authorized Service Center (See
the REPAIR PARTS section of this manual.)
WARRANTY
ONE YEAR LIMITED WARRANTY ON CRAFTSMAN GAS CHIPPER-SHREDDER
For one year from the date of purchase, when this Craftsman Chipper-Shredder is maintained, lubricated and
tuned up according to the instructions in the owner’s manual. Sears will repair, free of charge, any defect in
material and workmanship.
If this Craftsman Chipper-Shredder is used for commercial or rental purposes, this warranty applies for only 30
days from the date of purchase.
This warranty does not cover;
• Expendable items which become worn during normal use, such as blades, chipper blades, flails, air cleaners,
spark plugs and catcher bags.
• Repairs necessary because of operator abuse or negligence, including bent crankshafts and the failure to
maintain the equipment according to the instructions contained in the owner's manual.
WARRANTY SERVICE IS AVAILABLE BY RETURNING THE CRAFTSMAN CHIPPER-SHREDDER TO THE
NEAREST
SEARS
SERVICE
CENTER/DEPARTMENT
IN
THE
UNITED
STATES.
THIS
WARRANTY
APPLIES ONLY WHILE THIS PRODUCT IS IN USE IN THE UNITED STATES.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state.
SEARS, ROEBUCK AND CO., D/817WA, Hoffman Estates, IL 60179