Coway CP-07BLO - Manual (Page 22)

21
FILTER REPLACEMENT METhOD
4 . After releasing 2 fixed screw in the upper side of the product using the
driver, pulling forward with grasping the upper side of the front cover .
5 . After separating the fitting connected to the filter trying to replace, please
replace the filter . (Separate the fitting using the proper tool .)
6 . Please fit the groove of the front cover and close the upper cover of the
product after tightening 2 fixed screws in the front of the product using the
driver .
By changing the filter and connecting the fitting and the hose precisely, check that
there is no leakage and drain the first filtered water necessarily.
Tips
Please be sure to use the new filter after cleansing.
- Neo-sense filter: Please assemble after cleansing with Neo-sense filter for about
30 seconds.
- Inno-sense/Membrane filter (RO): Please assemble after cleansing with the main
water passed Neo-sense filter for about 3
minutes.
Tips