Coway CP-07BLO - Manual (Page 16)

15
INSTALLATION
 Water filtration device installation place 1
Please install the water filtration system not at a rough place,
a damp place, a place where the unit is exposed to the direct
sunlight, a place where dust is present, or a place that the water
drops.
 Water filtration device installation place 2
Please install at the place where it is 10 cm or more off from the
wall and the bottom is flat and firm.
 After installing the water filtration system
Get rid of the filtered water above the fulled water 2 times or
more necessarily after installing.
 Cold water plumbing
Please connect to the cold water pipe necessarily. (If you connect
to the warm water pipe, the filter can be damaged.)
 Movement and installation
When the position is moved, connect the power cord when 30
minutes passes after installing.
Be cautious!
To maintain optimal product performance, consult a Coway engineer for the detailed
installation methods.
There may be some water remaining inside of the filter which was used to test the
product during inspection process at the factory.
Please feel at easy and use as it isn’t the used product.
Don’t reuse the main water supply valve and hose that was previously used when
you install the product.
Tips