Hardware shown full size except where noted, Parts bag "a – Craftsman 486.24608 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP 1
: (SEE FIGURE 2)
• Open parts bag labelled "A" and verify that all parts
are present.
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
mu
(not full size)
PARTS BAG "A"
FIGURE 2
Ref.
Part
Qty. Description
A
43350
4
Carriage Bolt, 3/8-16x1"
B
44072
4
Whiziock Nut, 3/8"
C
R19171616
4
Washer, 1/2" x 1"
D
47674
4
Plug
66460
1
Bumper
STEP 2:
(SEE FIGURE 3)
•
Remove tractor hood. (Refer to tractor manual.)
•
Remove the browning shield as shown.
STEP 3:
(SEE FIGURE 4)
• Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for remaining
plugs.
STEP 4:
(SEE FIGURE 5)
• Place a washer onto a carriage bolt and then Insert
the bolt Into the second mounting hole from the front
of the tractor frame. Securely tighten a whiziock nut
onto the bolt on the outside of the tractor frame.
Repeat on other side of tractor.
Call 1 -866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE