Install chute deflector remote control, Check tire pressure, Assembly / pre-operation – Craftsman 944.528398 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALL CHUTE DEFLECTOR REMOTE CONTROL
(See Figs. 8 and 9)
1, Install remote cable bracket to discharge chute with
5/16-18 carriage bolt and 5/16-18 locknut as shown.
Tighten securely,
2, Install remote cable eyelet to chute deflector with
1/4-20 shoulder bolt and 1/4-20 locknut as shown.
Tighten nut securely. Eyelet will be loose on shoulder
bolt,
3, Install spring hooks between hex nuts on chute rotater
head and into hole in chute deflector as shown.
ASSEMBLY / PRE-OPERATION
CHECK TIRE PRESSURE
The tires on your snow thrower were overinflated at the fac
tory forshipping purposes, Correct and equal tire pressure
is important for best snow throwing performance,
• Reduce tire pressure to 14-17 PSI,