Carburetor, Spark plug, Accessories – Craftsman 247.888510 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reassemble the new friction wheel rubber to
the friction wheel assembly tightening the six
screws in rotation and with equal force.
Position the friction wheel assembly up onto
the pin of the shift rod assembly and slide the
shaft through the friction wheel. See Figure 30.
Slide the shaft into the hex I.D. of the sprocket,
the spacer and the left ball bearing and secure
with the bell washer and hex bolt.
Carburetor
A
WARNING: If any adjustments are made to
the engine while the engine is running (e.g.
carburetor), keep clear of all moving parts.
Be careful of heated surfaces and muffler.
If you think the carburetor needs to be adjusted, see
your nearest authorized Tecumseh Service Outlet.
ACCESSORIES
These accessories were available when the snow thrower was purchased. They are also available at most
Sears retail outlets, catalog and service centers. Most Sears stores can order repair parts for you when you
provide the model number of your snow thrower.
Spark Plug