Craftsman 486.248400 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate
the equipment. Exercise caution at all times, when using power equipment.
Read this owner's manual carefully and know how
to operate your snow thrower and how to stop the
unit and disengage the controls quickly.
Never allow children to operate the equipment.
Never allow adults to operate the equipment
without proper instruction.
Keep the area of operation clear of all persons,
especially small children, and pets.
Thoroughly inspect the area where the equipment
is to be used and remove all door mats, sleds,
boards, wires and other foreign objects.
Disengage all clutches and shift into neutral before
starting engine.
Do not operate equipment without wearing ad
equate winter outer garments.
Wear substantial footwear which will protect feet
and improve footing on slippery surfaces.
Check fuel before starting the engine. Do not
remove the fuel cap or fill the fuel tank while the
engine is running or hot. Do not fill the fuel tank
indoors. Gasoline is an extremely flammable fuel.
Make sure the snow thrower height is adjusted to
clear the type surface it will be used on.
Do not use the snow thrower without the rear
weight attached to the tractor.
Never make any adjustments while the engine is
running.
Always wear safety glasses or eye shield during
operation or while performing and adjustment or
repair.
Do not place hand or feet near rotating parts. Keep
clear of the discharge opening at ail times.
Use extreme caution when operating on or crossing
gravel surfaces.
Do not carry passengers.
After striking a foreign object, stop the engine,
remove the wire from the spark plug and then
thoroughly inspect the snow thrower for damage.
Repair any damage before restarting and operating
the snow thrower.
If the snow thrower starts to vibrate abnormally,
stop the engine immediately and check for the
cause. Vibration is generally a warning of trouble.
Stop the engine whenever you leave the operating
position, before unclogging the snow thrower or
making any adjustments or inspections.
Take all possible precautions when leaving the unit
unattended. Disengage the attachment clutch lever
or switch, lower the snow thrower, shift into neutral,
set the parking brake, stop the engine and remove
the key.
When cleaning, repairing or inspecting, make
certain all moving parts have stopped..Disconnect
the spark plug wire and keep it away from the plug
to prevent accidental starting.
'
Do not run engine indoors except when transport
ing the snow thrower in or out of the building. Open
the outside doors. Exhaust fumes are dangerous.
Do not clear snow across the face of slopes.
Exercise extreme caution when changing direction
on slopes. Do not attempt to clear steep slopes.
Refer to the slope guide on page 19 of this manual.
Never operate the snow thrower without guards,
plates or other safety protection devices in place.
Never operate the snow thrower near glass enclo
sures, automobiles, window wells, drop offs etc.
without proper adjustment of the snow thrower
discharge angle.
Never direct discharge at bystanders or allow
anyone in front of the snow thrower.
Never run the snow thrower into material at high
speeds.
.
Do not overload the machine capacity by attempt
ing to clear snow at too fast a rate.
Never operate the machine at high transport speed
on slippery surfaces. Look behind and use care
when backing.
Watch for traffic and stay alert when crossing or
operating near roadways.
Disengage power to the snow thrower when trans
porting or when not in use.
Use only attachments and accessories approved by
the manufacturer of the snow thrower (such as
wheel weights, counter weights, cabs etc.)
Never operate the snow thrower without good
visibility or light.
Look for this symbol to point out important safety precautions. It mean-Attention!!
Become alert!! Your safety is involved.