Attaching the mulching baffle, Adjustments cutting height, Assembly – Craftsman 247.38528 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
Attaching the Mulching Baffle
Your mower is shipped for side discharge operation. To convert mower
to the mulching operation, follow the sequence Indicated here:
1.
Lift up and hold the side discharge cover and insert the bottom lip
of the mulching baffle Inside the chute opening See Figure 6.
2.
Snap the hooks of the mulching baffle over the hinge pin of the
discharge cover. The hooks must snap into place on the hinge
pin, locking the mulching baffle firmly onto the mower. Release
the discharge cover.
ADJUSTMENTS
Cutting Height
Each wheel has a height adjustment lever to change the cutting height
of the mower. Refer to Figure 7.
1.
Depress height adjustment lever towards wheel.
2.
Slide lever to desired position for a change in cutting height.
3.
Release lever towards deck.
IMPORTANT:
All wheels must be placed In the same position. For
rough or uneven lawns, move each height adjustment lever to a higher
position. This will prevent you from cutting the grass too close to the
ground.
12