Craftsman 320. 28180 - Manual (Page 4)

Some of these foliowing symbols may be used on this tool. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the tool better and more safely.
SYMBOL NAME DESIGNATION / EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W
Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[g] Class 11 Construction Doublennsulated construction
Per Minute
Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
Read the Product Manual
To reduce the risk of injury, user must
read and understand product manual
before using this product.
0
Eye Protection
Always wear safety goggles or safety
glasses with side shields and a full-face
shield when operating this product,
A
Safety Alert Precautions that involve your safety.
(D
No Hands Symbol
Failure to keep your hands away from
the blade will result in serious personal
injury.
d)
No Hands Symbol
Failure to keep your hands away from
the blade will result in serious personal
injury.
#
No Hands Symbol
Failure to keep your hands away from
the blade will result in serious personal
injury.
No Hands Symbol
Failure to keep your hands away from
the blade will result in serious persona!
injury,
d
Hot Surface
To reduce the risk of injury or damage,
avoid contact with any hot surface.
28180 ManuaLRevised_07-0228 Page 4