Craftsman 320. 28180 - Manual (Page 11)

KNOW YOUR ROUTER TABLÉ
Your router table has a precision-built electric switch box and it should be con­
nected to only a 120-volt, 60-HZ AC power supply (normal household current).
DO NOT operate on direct current (DC). The large voltage drop would cause a
loss of power and the motor would overheat. If the router table does not oper­
ate when plugged Into correct 120-volt, 60-HZ AC ONLY outlet, check the power
supply. The router table comes with an 8~ft. power cord (no adapter needed).
1. Oversized table (14-1 /8” x 23-5/8”) for a large, smooth, durable, work sur­
face and improved sound absorption. Table height clearance is 11-1/4 in. to
accommodate most fixed and plunge-based routers
2. Integrated safety switch with two outlets. Single-socket capacity is 15 Amps,
total capacity is 20 Amps.
3. Extended fence provides maximum work piece support; the fence can be
moved forward and backward 3-3/4 inch.
4. Infeed and outfeed fence can each be extended 2 in.
5. Outfeed fence can be adjusted as much as 9/16-in. forward of the infeed
fence for joining operations.
6. Vacuum adapter fits a 2-1/2 inch shop vacuum hose.
7. Miter-gauge adjusts from 0“ to 60° in both directions for increased stability in
many difficult feed situations.
8. Fastening holes (11/32-inch dia.) allow the Router Table to be fixed to a
stable work surface.
28180 ManuaLRevised_07C22B Page 11