Sony ST-SA50ES - Manual (Page 4)

Receiving Preset Stations
This section shows you liow to receix’e preset stations.
3
To tune in a non-preset station,
see "Tuning stations
(Automatic Tuning)" on page 8.
1 Make sure you've hooked up the tuner and preset stations.
(See pages 5 - 7 for hookups and page 8 for presetting.)
2 Turn on the amplifier and select the TUNER mode.
3 Press ® to turn on the tuner.
Press SHIFT to select A, B, C, or D.
^ Press the preset number you want (1 - 0).
To check broadcasts by scanning the preset stations
1
Press TUNE MODE repeatedly until "PRESET" appears in the display.
2
Turn TUNING/SELECT.
Each time you turn TUNING/SELECT, a preset station is received and
the settings (preset code, frequency, and station name, etc.) appear in the
display. The signal meter indicates the strength of the broadcast signal.