Sony CDP-211 - Manual (Page 15)

Playing in a
Desired Order
To check your program
Press CHECK. The first selection in
the program will appear.
Each time you press CHECK, the next
selection in the program will appear. After
the last selection, “End" will be indicated
and the display will soon return to the initial
status.
While checking the program for side A,
appears and also for side B, (c0 appears.
CHECK
CLEAR
Changing Your Program
You can make the following changes before
starting play.
To erase the last selection, cn
press CLEAR. Each time you press
CLEAR, the last selection in the program
will be erased.
To erase the entire program
Press ■ once in stop mode; twice during
play. The program is also erased when you
turn off the unit or you press
± OPEN/CLOSE.
To add a selection to the end of the
program, simply press the numeric button.
To delete a selection, press CHECK
[T1
repeatedly until the unwanted selection
appears. Then press CLEAR.
To change the order, press ■ in stop mode
to erase the program. Then repeat the
programming procedure from the
beginning.
To check the remaining time
Press TIME once to see the remaining time
of the selection being played; twice to see
the total remaining time of the programmed
selections; once more to return to the initial
display.
If you have inserted a pause, the display
shows the remaining time until the pause.
What is the tape indicator?
During program play, the tape indicator shows
you which side of the program is being played.
fo^l : Program A is being played.
: Program A has been played and the
unit is in pause mode, or program B
is being played.
15