Sony wega KV-20FS12 - Manual (Page 35)

Operating Instructions
Using the Timer © Menu
To access the Timer menu, see "To access a menu" on page 17.
m
Timer
Timer 1 : Set
Timer 2: Set
Current Time
Daylight Saving: NO
----- :-------AM
Move WWIBW .SplBr:t m Fnri W
Timer 1 and With the menu open, highlight Timer 1 or Timer 2:
Timer 2 1 Press or m, then press or cs again.
Scheduled 2 Press t> or O until the desired day or range of days is
viewing displayed, then press 'i> or cs.
3 Press O or 0 to select the hour you want the TV to turn
on, then press s> or cs.
4 Press 0 or O to select the minute you want the TV to turn
on, then press o or cxi.
5 Press 0 or O to set the duration, up to 6 hours, then press
■t> or C23.
6 Press 0 or 0 to set the channel and press or cs.
You must set the Current time before you can use Timer 1 and Timer 2.
You can set the Timer to ON, Set, or OFF. Once the timer is set, you can turn it
on or off without having to go through the settings.
Current With the menu open:
Time 1 Press o or cs.
2 Press O or ■(> to select the day and press or cs.
3 Press 0 or until the current hour is displayed, then
press <> or CT 5 .
4 Press O or 0 until the current minute is displayed, then
press o or cs.
Daylight YES: Select in spring to compensate for Daylight Saving.
Saving NO: Select in fall at the end of Daylight Saving.
^ When you perform Auto Program, all Timer 1 and Timer 2 settings will be
cleared.
^ Any loss of power will cause Timer 1 and Timer 2 settings to be cleared.
26