Sony CDP-C910 - Manual (Page 11)

DISC selectors DISC SKIP
■DISC SKIP
•TRACK
buttons
( 1 - 20 )
Selecting a Desired Disc
By using the DISC selectors or the DISC SKIP button
during play, you can locate the beginning of any disc.
To select a particular disc Press the corresponding
DISC 1 to 10 button.
To change to the disc next
to the current one Press DISC SKIP.
Locating a Particular Selection
Locating a selection in sequence (Automatic Music
Sensor)
You can locate the beginning of a selection on the disc
being played.
To locate the beginning of
the selection being played Press once.
To locate the beginning of
the next selection Press once.
Continue to press until the selection you wanted has been
located.
To locate directly_________________________________
Press one of the TRACK buttons to enter the desired
selection number.
• ¡T] to QS on the main unit.
To enter a number greater than 10, use the r>ïô1
button.
• H] to [20] on the remote commander.
To enter a number greater than 20, use the I >201
button.
e.g. To play from selection No.22
Press [yfOlfHi^ or .
To play from selection No.30
Press rTTÔ][3irfÏÏ1 or [>^Î31FIÔ].
PfÏÏl functions as the figure 0.
Locating a Particular Point in a
Selection
You can locate a particular point in a selection during play.
To search quickly while monitoring the sound
To go ahead at high speed
Keep ►► pressed during play and release at the desired
point.
To go back at high speed
Keep ◄◄ pressed during play and release at the desired
point.
To search quickly by observing the display
Press II then keep ►► or ◄◄ pressed. The search
speed will increase, but there will be no sound. Find the
desired point by observing the display.
Press ► or II again at the desired point.
If you continue to press I
If you continue to press ►► once the end of the disc has
been reached, OVER appears in the display window.
Press ◄◄ or to return to the normal display.
11