Using the channel set up menu, Using the set up s menu – Sony KV-32S42 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the CHANNEL SET UP
menu
CHANNEL SET UP
► CABLE: ON
CHANNEL FIX: OFF
AUTO PROGRAM
CHANNEL SKIP/ADD
CHANNEL CAPTION
DMENU
Movefflfil Select® Exit S3
To select the CHANNEL SET UP
menu;
Display
Highlight a— Select
MENU
dD
Note
Your remote control can be programmed to
operate your cable box. (see page 30)
CABLE
CHANNEL FIX
Useful when you
have a cable box or
satellite receiver
connected
AUTO PROGRAM
CHANNEL
SKIP/ADD
CHANNEL
CAPTION
Label up to 12
channels with their
call letters
ON:
Select if you are receiving cable channels with a CATV cable.
OFF;
Select if you are using an antenna.
You will_need to run AUTO PROGRAM after changing your CABLE settings.
2-6: Select when you want to control all channel selection through a cable box.
Select the appropriate channel number (usually 3 or 4) and use the cable box’s
remote control for selection.
AUX 2-6:
Select when a cable box is connected to the AUX input, (see page 4).
Press the
ANT
button to alternate between inputs. (KV-32S66, 35S66 only)
VIDEO 1;
Select from available video inputs when you have video equipment
connected (e.g. satellite receiver) and you want your TV fixed to it.____
Instructs the TV to program ail receivable channels.
With the CHANNEL SKIP/ADD window open:
1 Select the desired channel.
2 Press CZ) to SKIP or ADD (only one option will be
available).
CHANNEL SKIP/AOD
SKIP
► ADD
DMENU
Use [0-9] or [CH +/-]
to select the channel
MoveSfi) Select® Exit
6
With the CHANNEL CAPTION menu open:
1 Press GZ and then ♦ or ♦ to access the desired
channel, and press again.
2 Press ♦ or ♦ to display the first letter or number
of the caption and press G3 to select it.
3 Press
G3
to activate.
CHANNEL CAPTION
► CHANNEL
CAPTION -
DMENU
Move00 Select® Exit®
23