Selecting the illumination mode of lcd back light, 1 press menu to enter the menu mode, 4 press menu to exit the menu mode – Sony ICD-80 User Manual
Page 42: Fllorm off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Illumination Mode of LCD
Back Light
LIC;HT OPR: The display window is illuminated for 3 seconds after each
operation.
IdCHT ALL: The display window is illuminated at all times during
operation.
1
Press MENU to enter the menu mode.
2
Turn the jog dial to display "LIGHT OPR
(or ALL)" and press the jog dial.
"OPR (or ALL)" will flash.
3
Turn the jog dial to select "OPR" or
"ALL" and press the jog dial.
Now the setting is completed.
4
Press MENU to exit the menu mode.
0
___
flLORM OFF
H_______
W i‘
When the unit is not being operated (when the display shows the current
time), you can illuminate the display window by pressing STOP. This
enables you to check the time even in a dark place.
Note
The effect of the illumination may be reduced in a bright location.
42