Tv and vcr, Optional connection), Connecting additional equipment – Sony KV-24FV10 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
User Guide
k
Connecting Additional Equipment
TV and VCR
TV
1
Connect the coaxial cable from your TV antenna or cable TV to the IN
jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF IN jack on the TV.
^
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
(Optional connection)
3
If your VCR is equipped with video inputs, for better picture quality
you should connect A/V cables from AUDIO and VIDEO OUT on
your VCR to AUDIO/VIDEO IN on your TV. You can use the '
button to switch between the TV and VCR inputs.
, TV/VIpp
^ For optimum picture quality, use S VIDEO instead of the yellow AA/ cable.
S VIDEO does not provide sound, the audio cables must still be connected.