Tv and digital satellite receiver – Sony KV-24FV10 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV and Digital Satellite Receiver
Connecting Your TV
TV
1
Connect the cable from your satellite antenna to SATELLITE IN on
the satellite receiver.
2
Attach the coaxial connector from your cable or antenna to
VHF/UHF on your TV.
3
Using A/V connectors, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
^ You can use the button to switch between the satellite receiver and TV.
^ For optimum picture quality, use S VIDEO instead of the yellow AN cable.
S VIDEO does not provide sound, your audio connectors must still be
connected.
This manual is related to the following products: